3D Hinge, 180°, Aluminium, Zinc Diecast and Steel, Tectus TE 640 A8

Is the Tectus TE640 3D hinge suitable for my door and frame type?

Yes. The Tectus TE640 3D A8 is designed for flush doors and can be used with wooden, steel, or aluminium frames. It is also commonly selected when you want reliable 3 way adjustment for fine alignment during installation.

What door weight can I use with two of these hinges?

Up to 160 kg for a pair. When installing with two hinges, this model is rated for a maximum door weight of 160 kg. For heavier doors, you will typically need additional hinges, so it is best to check your full door and hinge specification.

How much adjustment does the TE640 3D A8 provide after fitting?

Three dimensional adjustment. You get 3D, side adjustment of 3 mm, height adjustment of minus 3 to plus 3 mm, and closing pressure adjustment of plus or minus 1 mm. This makes it easier to dial in even gaps and smooth closing once the door is mounted.

What is the opening angle of this hinge?

180 degrees. The TE640 3D A8 is specified for an opening angle of 180 degrees, making it a good choice for applications where you want the door to open fully without restrictions.

Which door thickness and mortise preparation are required?

Door thickness is minimum 40 mm. This hinge is suitable for doors with door thickness of at least 40 mm. The recommended router bit diameter is 24 mm, and the hinge installation also references a thrust ring diameter of 30 mm, which helps achieve the correct fit in the prepared recess.

Does the rounded flange shape affect compatibility?

It is part of the hinge system geometry. This model uses a rounded flange shape with a flange width of 32 mm. As long as your door and frame preparation matches the hinge layout requirements, the flange form factor should be compatible with the intended installation.

How do I confirm the correct hand direction for mounting?

Use the DIN left or DIN right indication. For installation, you should select the correct hand for DIN left or DIN right applications. If you are unsure, compare your door swing direction and hinge positioning before routing.

What comes in the box and is it ready to fit?

It is supplied with fixing screws. The hinge is delivered with fixing screws to support straightforward installation. Make sure your prepared recess and routed dimensions align with the hinge requirements for the best results.