LED Strip Light 24 V, Length 400-950 mm, Rated IP20, Loox Compatible LED Blade I

Is the LooxC LED Blade IFR suitable for use inside a room?

Yes. This model is rated IP20, which makes it appropriate for dry indoor locations such as under kitchen units, cabinets, and general interior lighting. If you need protection against dust and splashes, you will need a higher IP rated option.

Does it include an infrared sensor switch or do I need to add one?

It includes the infrared sensor switch. The product subtitle confirms it is an LED blade with an integrated sensor, so you can switch it on and off using motion detection rather than a separate switch.

What is the brightness and how warm is the light?

You get a natural white output at 4000 K, designed for clear, everyday visibility. The light performance is rated at 82 lm per W, which helps deliver efficient illumination for its power consumption.

What power supply do I need to run this LED strip?

This is a 24 V LED blade. For Loox 24 V systems, you typically connect it to a suitable Loox 24V connector and power supply. The product is supplied with a 2.0 m lead with Loox 24V connector, which makes installation straightforward for compatible systems.

How is it installed and can it be surface mounted?

Surface mounting is supported. The blade is intended to be fixed onto the area you are lighting, and it is supplied with fixings to help you secure it in place cleanly.

How long is the cable and will it reach common mounting positions?

The unit comes with a 2.0 m lead to connect into your Loox 24 V setup. In most under cabinet or display lighting arrangements, this length is usually sufficient to route to a nearby connection point without needing extra cable.

Does the light colour match well for tasks like kitchens?

The product has a Ra of 80, which supports good colour rendering for everyday tasks. This is commonly suitable for kitchen worktops, display shelving, and areas where you want colours to look natural rather than washed out.

What is the length of the LED blade and does the 380 mm model match the stated dimensions?

The product is listed as IFR 380 mm and the subtitle states a length of 400 mm. In practice, the overall mounting size can differ slightly from the labelled length depending on how the manufacturer defines the usable light section versus the full unit. If you have a tight cut to length situation, it is worth measuring the available space and confirming the mounting footprint before ordering.