Cup Pull Handle, Brass, Fixing Centres 64 mm, Bevera

Product Details

Will this cup handle fit my cabinet with a 64mm hole spacing

This Bevera Cup handle is designed for a 64mm hole spacing. If your existing cabinet hardware uses the same centre to centre measurement, it should be a straightforward swap. Measuring your hole spacing before ordering is recommended.

Which screws are included with Part No 151.00.774

The handle is supplied with 2x M4 x 10mm, 2x M4 x 20mm, 2x M4 x 26mm and 2x M4 x 30mm screws. This gives you flexibility depending on your cabinet door or drawer thickness.

What are the overall size and projection dimensions

The handle measures 102mm in length and 31mm in height, with a width of 46.5mm. This helps you check clearance around the door or drawer face before fitting.

Is the aged brass effect finish consistent with real brass look

It features an aged brass effect appearance, giving a vintage style similar to aged brass hardware. Since this is a decorative finish, the look can vary slightly across pieces, which is normal for aged effect styles.

What cabinet doors or drawers is it most suited for

As a cup pull handle with a 64mm hole spacing, it is commonly used on cabinet doors and drawers where you want a comfortable grip and a traditional look. It is a good match for furniture styles that suit aged metal finishes.

Can I use it to replace an existing cup pull without changing the fixing holes

If your current handle uses 64mm hole spacing and compatible screw fixing sizes, you will likely be able to replace it with minimal alteration. Using the provided M4 screw lengths helps you dial in the correct fit.

Is the cast iron body suitable for everyday use

These handles are made from cast iron, which is typically chosen for strength and long lasting hardware. With normal care and proper installation, it is well suited to regular opening and closing of cabinets.