Stainless Steel S/B 600x750x0.9mm

Installation and modification advice:
Leave on the protective film
Add masking tape to the area to be cut
Draw out the cutting line
Drill a hole to fit jigsaw blade to cut round
A drop of oil may may be needed on the blade
Storage: We recommend that the plastic coating protecting the stainless steel must be left intact until installation is completed
Cleaning and care:
Chlorides such as bleach or common salt and acids of any kind can damage all grades of stainless steel surfaces. If a spillage occurs rinse immediately and thoroughly with plenty of fresh water and then dry with a soft cloth
Metal objects that may rust should never be left in contact with stainless steel
Care should be taken when handling and installing these products. For your safety, we recommend that hands are protected from unfinished edges and corners