Glue In Sleeve, M4 - M8 Internal Thread, Plastic, with Grooves for Glue

Product Details

Will this glue in sleeve fit my M6 bolt?

Yes. The Glue In Sleeve M6 D8.0x11 mm is designed with an M6 internal thread so it suits M6 screws and bolts. It also provides a reliable fixing in materials where a bonded insert is preferred.

What hole size does the sleeve require for installation?

Use a Ø8 mm hole. This sleeve is made for an Ø 8 mm bore. Checking the hole diameter before fitting helps ensure the insert sits correctly and bonds as intended.

How deep is the insert and will it sit flush?

The sleeve length is 11 mm. The fixing body length is 11 mm, which determines how far the insert reaches into the prepared hole. For a flush or near flush result, match the drilled hole depth and insertion method to your application.

What is the outer diameter and where should I measure it?

Outer diameter is 8.5 mm. The sleeve has an outer Ø 8.5 mm. This outer size is relevant when confirming clearance within the drilled hole and surrounding material thickness.

How many sleeves are included in a pack?

The pack contains 100 sleeves. This 100 pack is ideal for regular use, workshops, and projects where you need consistent quantities for installation.

Is it suitable for general plastic fixings and internal bonding?

It is made from polyamide and is intended for glue in use. Polyamide sleeves are commonly used for bonded fixings because they pair well with appropriate adhesives and help create a secure threaded point in suitable substrates. For best results, use the correct glue recommended for your material and application.