Timberfix 360 Premium Wood Screw, Partially Threaded, Countersunk Head

Product Details

Is Timberfix 360 suitable for use with hardwood and chipboard?

Yes. Timberfix 360 screws are suitable for a wide range of timber based materials, including hard wood, chipboard, oak, plywood, soft wood, OSB and MDF board. This makes them a practical choice for joinery, general fixings and board applications.

What does 6 mm thread and 180 mm length mean for my project?

6 mm diameter refers to the thread size, and 180 mm is the screw length. This length is commonly chosen when you need strong pull through for structural timber connections or thicker board work. Using the correct size helps improve grip and reduces the risk of stripping.

Will the countersunk head sit flush in the timber?

Yes. This screw has a countersunk head designed to sit flush with the surface when driven correctly. It is ideal when you want a neat finish, especially for projects where heads will be visible or where a clean face is important.

Do these screws have partial threading and what difference does that make?

They are partially threaded. Partial threading can help provide better clamping action by allowing a smoother shank section to pull the components together while the threads grip the main material. This is useful for producing tight, stable joints.

Are these screws zinc plated for protection against corrosion?

Yes. Timberfix 360 screws are zinc plated, which helps provide corrosion resistance for many indoor and general outdoor sheltered applications. For wet or fully exposed conditions, consider a fastening specifically rated for those environments.

Do I need a specific bit or tool setup to drive these screws?

Use a suitable Pozidriv driver bit for best results. Driving with the correct tip helps reduce cam out, prevents damage to the screw head, and improves consistency when fitting multiple screws.

Can I use these screws for board fixing into studs or wooden frames?

Yes. With their long length and suitable thread design, they are a good option for fixing boards into timber or wooden framing where strong holding power is needed. Always pre check that the screw length matches your material thickness so you achieve a secure bite without going too deep.