Single Door Flap Fitting, Complete Set, Free Space 1.11

Product Details

Will this flap fitting suit my cabinet opening angle requirement?

This model E is designed for a flap opening angle of 90° or 107°. Check your application and confirm the angle you need before fitting so the hinge behaviour matches your clearance and access requirements.

What cabinet sizes and flap heights can Free Space 1.11 support?

It is intended for standard stay flap applications with a front height up to 650 mm, and is suitable for cabinet height in the range 225 mm to 650 mm. It is also intended for cabinet widths of up to 1,800 mm.

How much installation depth is required when fitting this stay flap system?

The installation depth for this single door flap fitting is 63.00 mm. Make sure you allow this clearance in the carcass or mounting area to avoid fouling the flap hardware.

Is it suitable for use on wood or aluminium frame fronts?

Yes. The fitting is specified for lid materials including wood and aluminium frame front panels. If you are using an aluminium frame front, ensure you use the correct screw set reference mentioned for your frame width.

Does the fitting allow for adjustments after installation?

Yes. The system includes adjustment facilities for height, side, tilting angle, and holding power. This helps you fine tune alignment and closing behaviour once the flap is mounted.

Which screw set should I order for aluminium frame front panels?

If you are fitting an aluminium frame front panel, you should order screw set 372.27.600 for aluminium frame front panels, specifically where the frame width is 45 mm. Using the correct screw set helps ensure a secure fixing.

What colour is the model and will it match typical interior finishes?

The product comes in light grey. The lever arm finish is specified as nickel plated, which is commonly chosen for a neat look on flap furniture and commercial fit outs.