Dialock EFL3 Furniture Lock Case

Functionality
In combination with the FT 200 / FT 200 CAP furniture terminal, the furniture lock is opened for 3 s after an authorised user key has been presented (standard latchbolt function). It locks automatically after the open time has elapsed.
The door status (locked / unlocked) can be determined with the feedback contact and additional macro. The connected FT 200 furniture terminal then sets an alarm signal.
More information about functionality can be found under the FT 200 / FT 200 CAP furniture terminal.

Use marking gauge for installation.

Note max. possible cable lengths, for more information see MLA 6P and MLA 8 multi-lock adapters.

The retaining plate of the locking component can be screwed on with a furniture handle (hole spacing 32 mm) at the opposite side.

Particularly suitable for furniture constructions with soft closing and self closing mechanisms. Not suitable for drawers and hinged doors with Push-to-Open function.

No additional fascias/materials (e.g. slotted sheet metal) must be installed between the EFL 3 / EFL 3C and the locking component.

Self-adjusting locking component with 2D tolerance compensation +/- 2 mm. Additional adjusting facility on the lock and locking component.

Please order CC 200 connection cable and marking gauge for EFL 3 / EFL 3C separately

1x EFL 3 or EFL 3C furniture lock
1x Locking component