Dialock FT200 - EFL 3/3C Locks - Std

Please order separately:
EFL 3 / EFL 3C furniture lock
CC 200 connection cable (connecting cable between EFL 3 and FT 200 / MLA 6P / MLA 8)
PS 4 power supply unit
FAN 200 antenna
Programming and clearing key card
User keys
Dialock software and MDU 110 data transfer unit, if required
A macro is required when installing an acoustic signal generator (see "optional functions")
The plug connector must be ordered additionally when using the potential free input/output ports
An individual macro must be installed initially when using the relay output port

Standard functions
Operation by holding an authorised user key in front of the antenna which then transmits an opening pulse to the furniture lock
Spring bolt lock function: 3 seconds after the lock has been released, it is automatically locked again (open time setting variable up to 30 seconds).
Deadbolt lock function: The lock is permanently unlocked and locked by holding an authorised user key in front of the lock
acoustic feedback as read confirmation of the keys
Keyed alike furniture locks:
An authorised user key unlocks all locks which are connected to the FT 200 / FT 200 CAP furniture terminal simultaneously.
Several furniture locks can also be implemented with the MLA 6P / MLA 8 multi-lock adapters.
More information on functionality can be found under the MLA 6P / MLA 8 multi-lock adapters.
keyed to differ furniture locks:
An authorised user key unlocks only certain locks, even though several locks are connected to the FT 200 / FT 200 CAP furniture terminal.
Several furniture locks can also be implemented with the MLA 6P / MLA 8 multi-lock adapters.
A maximum of 12 key changes can be implemented in combination with the MLA 8 multi-lock adapter.
More information on functionality can be found under the MLA 8 multi-lock adapter.
One CC 200 connection cable is also required for each furniture lock.
Optional functions:
Indication of the locking status, e.g. unlocked door, by means of acoustic or visual (external LED) signal transmitters
With the spring bolt lock function, the opening time of the furniture locks can be set variably up to 30 seconds with the red and green programming card
Separate activation of the 2 antennas is possible via an individual macro
Customer-specific requirements (e.g. installation of an acoustic signal generator or actuation of an alarm system) can be implemented using macro programs by request
Notes on software operation:
When using the Dialock software, please contact your responsible Häfele employee.
Notes on macro programs:
Macro programs must be specified beforehand using a request form. This can be found at www.dialock-support.de in the Service section.
An MDU 110 data transfer unit and instruction from Dialock technician is required for programming. In case of detailed questions, please contact your responsible Häfele employee.

1x FT 200 furniture terminal
1x Mains lead