Copper W/T 1600x600x37mm

A luxurious warm metal that will enhance the application it’s designed forProviding an anti-bacterial and microbial surface is perfect for restaurant, bar and family living10 Year warranty1.2 mm thick copper wrapped onto an 18.0 mm thick solid board then an 18.0 mm lattice of MRMDF core (Moisture Resistant MDF), brushed copper finish, brushed effect runs horizontally. Front and both end edges are folded down and back underneath for safety, with the two corners welded and dressed (please note the dressed corners may look slightly different to the original copper but will soon mellow to look the same

• Depth: 600 mm
• Thickness: 37.0 mm
• Material: Copper
• Colour: Brushed
• Note: Installation and modification advice:Leave on the protective filmAdd masking tape to the area to be cutDraw out the cutting lineDrill a hole to fit a jigsaw blade to cut roundA drop of oil may be needed on the bladeCare should be taken when handling and installing these products. For your safety, we recommend that hands are protected from unfinished edges and cornersDue to coppers natural softness, please be aware that the copper products may have some light scratching underneath the protective plastic covering. We cannot guarantee the copper products will be free from scratchesStorage: We recommend that the plastic coating protecting the copper must be left intact until installation is completed. The copper should always be kept flat prior to fitting and in a warm and moisture free environmentFitting: Copper worktops should only be fitted in areas that experience normal cooking ranges of temperature and humidity. Particular care should be taken in newly built areas to ensure a stable atmosphere. All windows/doors should be in place, plasterwork fully dried and major works completed prior to installationCleaning and care: Chlorides such as bleach or common salt and acids of any kind can damage all grades of copper surfaces. If a spillage occurs rinse immediately and thoroughly with plenty of fresh water and then dry with a soft clothTo maintain the best appearance of your copper worktops, only use warm water and a mild detergent ensuring that the surface is rinsed thoroughly and then dried with a soft clothCopper will oxidise over time and will discolour by varying degrees. Most people accept this will happen and like the different patinas that appear (ring marks discolouration etc.). You can always bring copper back to a flat finish by gently rubbing over the surface with wire wool or similar products