Magna Pastel Full S/B 3050x600x6mm
Rated 3.5/5 based on 11 customer reviews

Magna Pastel Full S/B 3050x600x6mm

  • Product SKU: 562.71.064
  • Availability: In Stock
£227.89

Price inc. VAT

£227.89
Hurry! only 31 left in stock!
Ask about this product
Your message has been successfully sent to the store owner!
Apollo® Magna is 6 mm solid surface on chipboard core with a 1 mm balancerMagna is a stain, water and impact resistant and offers seamless joints with the added benefit that any offending marks and scratches can be simply ‘polished out’Seamless joints, homogeneousNon-porous, naturally resistant to mould, bacteria and mildewEdged with downturn on 3 sidesEasy to repair, clean and maintain10 year limited manufacturer’s warranty
  • Thickness: 6.0 mm
  • Material: Solid surface/chipboard
  • Colour: Pastel
  • Note: Measuring up:Any cut edges in a chipboard base material must be sealed with a chipboard sealer prior to installationApollo¬¨¬®‚àö√ú Magna Solid surface can expand as much as 1 mm/mtr. Always allow a gap of at least 3 mm if for example, worktops are captive between wallsTolerance is ¬¨¬®¬¨¬±2 mmSplashbacks and upstands over 100 mm high must have a minimum gap from the face to the rear of the hob - electric 50 mm, gas 100 mmAllow a minimum 50 mm from the cut-out to the front edgeWherever possible, joints in worktops should fall on a carcass end panel, giving added support to a jointJoints should be minimum of 100 mm from the sink or 120 mm from a hob cut-outAllow a minimum of 120 mm between heated cut-outsStainless steel overhang is 35 mm from the carcass front (not the door)Overhangs in excess of 300 mm should be supported and the worktop should be supported every 600 mmInstallationPlastering or tiling should be completed after installationRegular use of the care and maintenance kit should ensure worktops stay in good conditionInstallation is relatively easy, for either a competent DIY enthusiast or recognised kitchen installer to carry outNo specialist tooling required. Can be cut using normal woodworking routers and bladesPlan the worktop to ensure joints don‚Äö√Ñ√∂‚àö√ë‚àö¬•t fall on or within 100 mm of cut-outs
  • Order reference: Order jointing glue and worktop installation and care set separately