Slab Ice White Full S/B 3000x500x20mm
Rated 3.5/5 based on 11 customer reviews

Slab Ice White Full S/B 3000x500x20mm

  • Product SKU: 562.71.032
  • Availability: In Stock
£312.38

Price inc. VAT

£312.38
Hurry! only 24 left in stock!
Ask about this product
Your message has been successfully sent to the store owner!
Apollo® Slab Tech offers the warm seamless look of standard solid surface with the added appearance of natural stoneInconspicuous, unobtrusive and seamless jointsSimple to install with a revolutionary new glue that allows the installer to remove the excess from any joints before it sets20 mm and 30 mm solid mineral material10 year limited manufacturer's warrantyFinished performance tested by FIRA®Polished square edgeEasy to repair clean and maintain
  • Thickness: 20.0 mm
  • Material: Solid mineral
  • Colour: Ice White
  • Note: Measuring up:Apollo¬¨¬®‚àö√ú Slab Tech solid surface can expand as much as 1 mm/mtr. Always allow a gap of at least 3 mm if for example, worktops are captive between wallsTolerance is ¬¨¬®¬¨¬±2 mmSplashbacks and upstands over 100 mm high must have a minimum gap from the face to the rear of the hob - electric 50 mm, gas 100 mmAllow a minimum 50 mm from the cut-out to the front edgeWherever possible, joints in worktops should fall on a carcase end panel, giving added support to a jointJoints should be a minimum of 100 mm from the sink or 120 mm from a hob cut-outAllow a minimum of 120 mm between heated cut-outsStainless steel sink cut-outs to manufacturer‚Äö√Ñ√∂‚àö√ë‚àö¬•s recommendationsOverhangs in excess of 300 mm should be supported and the worktop should be supported every 600 mmInstallation:Some colours have different levels of pigmentation (particles). This may lead to a variation in the aesthetic appearance of the worktopPlastering or tiling should be completed after installationRegular use of the car and maintenance kit should ensure worktops stay in good conditionInstallation is relatively easy, for either a competent DIY enthusiast or recognised kitchen installer to carry outNo specialist tool required. Can be cut using normal woodworking routers and bladesPlan the worktop layout to ensure jonits don‚Äö√Ñ√∂‚àö√ë‚àö¬•t fall or within 100 mm of cut-outs
  • Order reference: Order jointing glue and worktop installation and care set separately