Slab Mar Blanco W/T 3000x625x20mm
Rated 3.5/5 based on 11 customer reviews

Slab Mar Blanco W/T 3000x625x20mm

  • Product SKU: 562.70.904
  • Availability: In Stock
£492.35

Price inc. VAT

£492.35
Hurry! only 24 left in stock!
Ask about this product
Your message has been successfully sent to the store owner!
Apollo® Slab Tech offers the warm seamless look of standard solid surface with the added appearance of natural stoneInconspicuous, unobtrusive and seamless jointsSimple to install with a revolutionary new glue that allows the installer to remove the excess from any joints before it setsA silky smooth solid 20 mm or 30 mm through coloured surfaceNon-porous, naturally resistant to mould, bacteria and mildewEdged with polished edges on 3 sidesAll standard components in Slab Tech are surface finished, sanded to 240 grit as standard for installation. The 3000 x 760 x 20 mm worktops are unfinishedEasy to repair, clean and maintainFinished performance tested by FIRA®10 year limited manufacturer's warranty
  • Version: Worktop
  • Material: Solid mineral
  • Colour: Marmo Blanco
  • Note: Measuring up:Apollo¬¨¬®‚àö√ú Slab Tech solid surface can expand as much as 1 mm/mtr. Always allow a gap of at least 3 mm if for example, worktops are captive between wallsTolerance is ¬¨¬®¬¨¬±2 mmSplashbacks and upstands over 100 mm high must have a minimum gap from the face to the rear of the hob - electric 50 mm, gas 100 mmAllow a minimum 50 mm from the cut-out to the front edgeWherever possible, joints in worktops should fall on a carcase end panel, giving added support to a jointJoints should be a minimum of 100 mm from the sink or 120 mm from a hob cut-outAllow a minimum of 120 mm between heated cut-outsStainless steel sink cut-outs to manufacturer‚Äö√Ñ√∂‚àö√ë‚àö¬•s recommendationsOverhangs in excess of 300 mm should be supported and the worktop should be supported every 600 mmInstallation:Some colours have different levels of pigmentation (particles). This may lead to a variation in the aesthetic appearance of the worktopPlastering or tiling should be completed after installationRegular use of the car and maintenance kit should ensure worktops stay in good conditionInstallation is relatively easy, for either a competent DIY enthusiast or recognised kitchen installer to carry outNo specialist tool required. Can be cut using normal woodworking routers and bladesPlan the worktop layout to ensure jonits don‚Äö√Ñ√∂‚àö√ë‚àö¬•t fall or within 100 mm of cut-outs
  • Order reference: Order jointing glue and worktop installation and care set separately