Walnut Wood W/T 3000x640x60mm
Rated 3.5/5 based on 11 customer reviews

Walnut Wood W/T 3000x640x60mm

  • Product SKU: 564.11.079
  • Availability: In Stock
£1,046.86

Price inc. VAT

£1,046.86
Hurry! only 24 left in stock!
Ask about this product
Your message has been successfully sent to the store owner!
Finger jointed in the length and edge glued to provide stability and strengthHardwood worktops are constructed from 40 mm wide, finger jointed pieces of kiln dried timberRaw sanded to 150 grit and ready for finishingThe Ultra Work surface sealant included in the Installation and Care Set is required to treat the wood before use, enhancing the natural grain of the wood and giving it a water resistant sealFabricated hardwood worktops have a silky smooth finish and are virtually maintenance freeThe colour of the wood will change over time, giving a beautiful and matured look10 Year limited manufacturer’s warrantyPrices include delivery to a U.K. mainland trade addressIndividually shrink wrapped with instructions includedSquare edge
  • Version: Worktop
  • Material: Solid timber
  • Colour: Walnut
  • Note: Measuring up:Apollo¬¨¬®‚àö√ú Timber can expand as much as 1mm/mtr. Always allow a gap of at least 3 mm if for example, worktops are captive between wallsTolerance is ¬¨¬®¬¨¬±2 mmSplashbacks and upstands over 100 mm high must have a minimum gap from the face to the rear of the hob - electric 50 mm, gas 150 mmUpstands should be fixed to the wall and NOT to the worktopAllow a 3 mm gap between the work surface and upstand, the only connection between upstand and worktops should be silicone sealant, allow the natural movement of your worktopAllow a minimum 50 mm from the cut-out to the front edgeWherever possible, joints in worktops should fall on a carcass end panel, giving added support to a jointJoints should be a minimum of 100 mm from the sink or 120 mm from a hob cut-outAllow a minimum of 120 mm between heated cut-outsStainless steel sink cut outs to manufacturer‚Äö√Ñ√∂‚àö√ë‚àö¬•s recommendationsStandard overhang is 35 mm from the carcass front, (not the door)Overhangs in excess of 300 mm should be supported and the worktop should be supported every 600 mm
  • Order reference: Wood installation and care set 564.13.998 must be ordered separately